Quick Deployment Manual

This documents will provide some methods for quick deployment target system into hardware board.
Firstly, please refer Estuary User Manual to get the project.
Then create an USB installation disk and deploy Linux system into hard disk of target board as following steps.

1. Plug USB Disk into host PC machine with Ubuntu 12.04

Prepare a USB Disk with at least space larger than 8G bytes and do following commands:

$cd ~/workdir/estuary
$./create-udisk.sh 

Afterwards, make selection according to prompt information.
At last, USB intallation disk may be created successfully.

2. Plug USB Disk to target board

Power on the target board after plugging USB disk built before, and select USB startup option in UEFI shell, and sys_setup.sh will be execute after ubuntu is started up.
Afterwards, make selection according to prompt information.
At last, the Hard Disk of target board will be deployed with a Linux system selected before by user successfully.

3. Reboot the target board again
Unplug USB Disk after power off, and power on it again, then select Hard Disk startup selection in UEFI shell, and Linux system will boot up from hard disk.